Welcome to the AngelSense Support Center

Using Listen-In (GPS 1)

Note: GPS 2 (Verizon device) guidance is available here 

In order to activate the Listen-In feature from your AngelSense app to the AngelSense GPS device: 

  1. Go to the Menu on the right hand side and click on "Listen-In"                   
  2. The telephone dialer will appear, displaying the device’s phone number. Start the call just like a regular phone call.


  • The AngelSense GPS device responds automatically, and Listen-In (one-way) mode begins.
  • During Listen-In mode (or AngelCall mode), the application does not receive GPS updates. If you are listening throughout the entire transit, the system will miss the transit. 
  • Voice quality greatly depends on where the device is attached and the ambient noise. Often, background noise makes it difficult to hear, but you can usually understand what is occurring.
  • Excessive Listen-In will drain a lot of power from the battery. Each listening hour uses 2 hours of battery life.
  • You can use Listen-In to locate a child inside an indoor place
  • Only the authorized phone numbers are allowed to Listen-In. 
  • Only two numbers can be authorized at a time to call the device. You can turn on and off authorization as needed in order to authorize other users.


Related Articles:

Enabling voice features for an emergency when disabled at school 
Is Listen-In Legal? 
Can other people call my child's device?
School Bus Monitoring Features
Why is my Listen-In call not coming through?