Welcome to the AngelSense Support Center

Connecting GPS 2 to Wi-Fi on the device

If you are having issues with connecting to Wi-Fi through your app, this is due to the device not having sufficient cellular reception in order to update your app with the Wi-Fi networks near your device. 
 
In order to connect your device to Wi-Fi you can have the device at the location where you are needing to connect it to Wi-Fi (school, for example)  and you have a couple of options. 
 
The first option is to connect your device to your personal mobile phone's Hotspot when it is an an area of good cellular reception and can update with the Hotspot in your app and then connect to the Wi-Fi of the location. 
 
The second option is to connect your device to Wi-Fi manually, directly within the device. AngelSense would need to undarken your device's screen in order for you to do this. 
 
  1. Unlock the device using the PIN of "2016"
  2. Select the Menu icon (circle with 6 dots at the bottom of the screen)
  3. Select Settings
  4. Select "Wi-Fi"
  5. Select the Wi-Fi network you wish to connect to
  6. Enter the password
  7. Select "Connect"